Committed to Quality…

Magnecor’s Commitment to Quality ensures that your ignition lead set is manufactured from the highest quality components available.

Hand-assembled by our highly trained production staff, Magnecor leads are covered by a 10 year guarantee which ensures long lasting reliability and service life.

Magnecor’s Exclusive Metallic Inductance Suppressed Conductor will outlast the life of any engine. Magnecor lead sets are not manufactured just to be a service item. To further improve reliability some Magnecor leads use different connectors to overcome problems associated with the original set you are replacing. This is particularly important if your vehicle is used for competition.

Stainless steel snap-lock terminals are used for spark plug ends and phosphor-bronze, brass or stainless steel terminals for distributor/coil ends. Leads are individually numbered.

Whatever the application-motorsport, performance, marine or family motoring, your engine’s performance will always benefit from a set of Magnecor ignition leads.

R-100 RACING CABLE

Designed for racing engines using racing ignitions,supercharging and exotic fuels.Extra large 10mm jacket made from aerospace extreme heat-resistant silicone rubber to provide additional heat protection and insulation.Exclusive Magnecor 2.5mm Metallic Inductance Suppressed Conductor will suppress EMI indefinitely.Can be used on street vehicles if space allows.

KV85 COMPETITION CABLE 8.5mm

Primarily designed for racing engines using racing ignitions,turbocharging and supercharging.Entire jacket made from aerospace extreme heat-resistant silicone rubber.Exclusive Magnecor 2.5mm Metallic
Inductance Suppressed Conductor will suppress EMI indefinitely,allowing this cable to be used on road vehicles with any ignition and LPG gas conversions.Can be fitted into most original lead holders.

ELECTROSPORTS 80 CABLE 8mm

Original equipment replacement.Designed to improve original ignition system performance on road vehicles using either electronic engine management systems or carburetors.Ideal for LPG gas conversion engines. Excellent RFI and EMI suppression.Flexible high-strength all silicone construction will allow cable to fit into original 7mm lead holders.

ELECTROSPORTS 70 CABLE

Direct replacement for 7mm original equipment carbon conductor leads with excellent RFI and EMI suppression.Overcomes problems associated with limited-life carbon conductors and poorly suppressed aftermarket spiral conductor leads on modern engines. Extreme strength, high temperature resistant silicone rubber jacket and high dielectric strength internal silicone insulator bonded by tape to outer jacket for superior terminal retention.

TIN PLATED COPPER CORE CABLE

For applications including classic and vintage vehicles wishing to retain originality (unprinted).Silicone rubber outer jacket,EPDM insulation.Also industrial applications.Unsuppressed. Also available in RED.

On this page you can view the ‘hard facts’ and get to the ‘core info’ about Magnecor’s products.

Should you need even more info than seen here, please contact Magnecor and ask for the technical department.